AVI Healthcare Pvt Ltd

Manufacturing Medical Equipment "Glocally"

header photo

VIHA dv10 Neonatal Ventilator

Download Brochure

Quality Assurance

Tested as per latest EN/IEC Standards

  1. EN 60601-1:2006/A1:2013 Medical electrical equipment. General requirements for basic safety and essential performance
  2. EN 60601-1-2:2015  Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests
  3. EN 60601-1-8:2007/A11:2017  Medical electrical equipment -- Part 1-8: General requirements for basic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems
  4. ISO 80601-2-12:2020  Medical electrical equipment — Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators

VIHA dv10 Advanced Neonatal Ventilator Introduction


VIHA dv10 is a powerful, versatile high end ventilator for Neonates and Paediatric patients. It offers a number of advanced and unique features along with wide range of modes, functions enables precise specialized treatment of critically ill patients.

VIHA dv10 's compact and powerful turbine offers  independence from compressed air to allow maximum mobility throughout the hospital.

  • Neonatal and Paediatric Ventilation
  • Invasive and Non Invasive Ventilation
  • Turbine driven Ventilation
  • Inspiration syncronized Ultrasonic / Vibrating mesh Nebulizer
  • High Flow Oxygen therapy, Bubble CPAP Mode, AMV T-Piece Resuscitation,Apnea backup Ventilation
  • Advanced modes such as APRV, BIVENT, MMV and PRVC
  • Advanced Maneuvers such as P0.1, Recruitment, O2 Flush, Inspiratory and expiratory hold, Intrinsic PEEP, Sigh
  • Inbuilt ETCo2 with Mainstream connector (Optional), Inbuilt SpO2 module (Optional)
  • Tested as per EN 60601-1:2006 /A1:2013, EN 60601-1-2:2015, EN 60601-1-8:2007/A11:2017, ISO 80601-2-12:2020

Unique Features

  • Touch  Screen User Interface
  • Turbine driven Technology
  • Battery Backup up to 6 hours
  • Bubble CPAP mode
  • High Flow Oxygen Therapy (HFNC)
  • Powerful Non Invasive Ventilation
  • Inspiration synchronized Ultrasonic / Vibrating mesh Nebulizer
  • Apnea Backup Ventilation
  • Active autoclavable Exhalation Valve
  • Dynamic Safety Valve
  • Proximal Flow Sensor Measurement
  • Flow and Pressure Trigger in all modes
  • ET CO2 Mainstream Capnography
  • Pulse Oximetry SpO2 and pulse

Modes of Ventilation

1. Invasive Modes: 

Volume Controlled: VC-CMV, VC-ACV, VC-SIMV (in Paediatric only)

Pressure Controlled: PC-CMV, PC-ACV, PC-SIMV, PC-APRV, PC-MMV, PC-BIVENT, CPAP/PSV with Apnea back up ventilation

Pressure Regulated Volume controlled: PRVC-CMV, PRVC-ACV, PRVC-SIMV

Additional Bubble CPAP mode and T-piece/PC-AMV mode in Neonatal

2. Non-Invasive Modes: When NIV is enabled, All the modes work in Non Invasive ventilation as well with automatic leak compensation 

3. OTherapy: High Flow Nasal Cannula (HFNC mode)

4. Pressure Support (PS): available in PC - SIMV, PC - BIVENT, PC - APRV, PC - MMV and VC - SIMV


Ventilator Maneuvers

  • O2 Flush
  • P0.1
  • Lung Recruitment
  • Nebulizer
  • Intrinsic PEEP
  • Inspiratory Hold
  • Expiratory Hold
  • Sigh
  • Tube Compensation
  • Proportional Pressure support

Technical Specification

Inspiratory Pressure 0 to 70 cm H2O
Pressure Support 0 to 70 cm H2O
Maximum limited pressure 100 cm H2O (70 cm H2O at ambient pressure < 950 mbar)
PEEP 0 to 30 cm H2O for Paediatric; 0 to 25 cm H2O for Neonatal
Respiratory rate (RR) 10 to 75 BPM for Paediatric; 30 to 200 BPM for Neonatal
I:E Ratio 1:9.9 to 9.9:1
Tidal Volume 30 - 350 ml for Paediatric; 2-60 ml for Neonatal
Pressure Trigger 0 to -10 cm H2O
Flow Trigger 0 to 20 LPM
Maximum Flow > 180 LPM
Volume Accuracy +/- 5%
O2 Concentration (FiO2) 21-100%
Leak Detection and Compensation > 50 LPM
O2 Therapy 0 to 50 LPM for Paediatric; 0 to 20 LPM for Neonatal
Oxygen Input 3 to 6 bar, Medical Grade
Display Colour touch screen TFT
Dimensions Patient Unit 300 x 300 x 330 mm
Weight 11.62 Kg; 25 Kg with trolley
Battery Lithium Phospourous, 25.6V 6Ah
Battery Backup time 360 mins
Mains Input Voltage 190-240VAC, 50 Hz
Power Consumption 150W
Standards and Approval

Tested as per: EN 60601-1:2006 /A1:2013, EN 60601-1-2:2015,
EN 60601-1-8:2007/A11:2017, ISO 80601-2-12:2020

Maneuvers O2 Flush, Sigh, P0.1, Lung Recruitment, Inspiration Hold, Expiration Hold, Nebulizer,  Tube Compensation, Intrinsic PEEP
Flow Sensor Sensatronic DP Flow Sensor - Adult, Pediatric & Neonatal
Oxygen Sensor Envitec, OOM202
Breathing Circuit Resistance ≤ 0.3mbar/Ls-1
Nebulizer Ultrasonic Nebulizer - Compatible with Aerogen Solo
Time - 0 to 30 mins, Inspiration Syncronized
Alarms up to 75 different colour-coded High, Medium and Low priority audio-visual alarms
Bubble CPAP Flow - 0 to 15 lpm, Pressure - 0 to 10 cmH2O, FiO2 - 21 to 100%